This is a listing of Ceramic Multilayer Capacitors
products and suppliers in Asia, China and Taiwan. The listing contains product
model, product name, product description, specification, manufacturer name,
country of origin, supplier name, supplier description, keywords, Web site
and a showcase of major products.
NP0: Temperature compensation type, with little or no change in capacitance with variation in temperature. hence, they are used in radio-frequency oscillators, precision timing circuits, ultrastable amplifiers, etc.
X7R: Temperature stable type for by-pass and decoupling in radio and television receivers, computer, servo ...
This displays non-permanent adhesion properties, allowing the adherent to be held firmly temporarily, making it suitable for use in the initial stage of electronic resistor, film capacitor or electrolytic capacitor assembly.
Its use in the following stages also gives it the name "Advance Tear Tape or Semi-Adhesive Tape".
These capacitors are designed primarily for use coupling and by-pass for electronic circuits of low voltage. These have found widespread acceptance not only in the radio and television industry but also in industrial electronics.
Multilayer ceramic capacitor has wide application in computer, data processing, telecommunication, industrial control and instrumentation equipment. The radial lead MLC is built with superior moisture and shock resistant epoxy coating material, can be supplied in both, bulk or taping form for automatic insertion.
1.With a high degree of adhesion strength, stable bonding, and the ability to resist high temperatures for a long period of time, M3464/M386H/M3H laminated together with aluminum or phenolic bar, or K-liner during epoxy varnish coating and curing process, and won’t come off during long baking period at high temperatures. What’s more, the excellent adhesive on strong paper substrate can be easily ...
Multilayer ceramic capacitor has wide application in computer, data processing, telecommunication, industrial control and instrumentation equipment. The radial lead MLC is built with superior moisture and shock resistant epoxy coating material, can be supplied in both, bulk or taping form for automatic insertion.
These capacitors are designed primarily for use coupling and by-pass for electronic circuits of low voltage. These have found widespread acceptance not only in the radio and television industry but also in industrial electronics.
Dielectric Type - The choice of dielectric is largely determined by the temperature stability required:
NPO: Ultra stable Class I dielectric, with predictable change of electrical properties on temperature, voltage, frequency and time. Used in circuits requiring stable performance.
X7R: Stable Class II dielectric, with predictable change of preperties with temperature, voltage, frequency and ...
COG/NPO MLCC for general use belongs to Class one high-frequency capacitor. Its capacitance is very stable, almost not changeable along with the temperature, voltage and time and quite suitable for use in high frequency circuits.
X7R MLCC for general use belongs to Class two low-frequency capacitor. Its capacitance is stable and suitable for all kinds of filter and coupling circuits.
Y5V MLCC ...
Type HM (Basic insulation)-IEC60384-14 – Class X1,Y2
1.Ideal for use as X/Y capacitors for AC filter and primary-secondary coupling on switching power supplies and adapters.
2.Ideal for use on D-A isolation and noise absorption for DAA modems without transformers.
Type HJ (Basic insulation)-IEC60384-14 – Class X1,Y1
Ideal for use as X/Y capacitors for AC filter and primary-secondary coupling o ...
Inquiries for Ceramic Multilayer Capacitors
are welcome from worldwide agents, wholesalers, traders, importers, and
distributors. New product listings for Ceramic Multilayer Capacitors
have constantly been updated.
