ARG1205b/g, 2.4GHz Outdoor Signal Booster, ARG1205b/g, 2.4GHz Outdoor Signal Booster Manufacturers & Suppliers, Exporters

Product Category > Computer and Communication > Communications and Networking

Select

Item Number:

ARG1205b/g

Product Name:

2.4GHz Outdoor Signal Booster

Description:

With a solid aluminum construction the 2.4GHz Outdoor Signal Booster is designed to give a massive boost in range for a standard 802.11 b/g wireless signal. The outdoor unit amplifies the signal of any 802.11b/g device for up to 30dBm(1Watt) in power. That means your AP or Wireless Router can easily reach over 20 kilometers point to point with an 18dBi antenna in the open space. Several models with different output level (500mW, 1W, 2W, 4W) are available to fit your operating environment.

News: new smaller DC injector is announcing and avaliable now.

Features:

Enlarge wireless signal indoor environments!

‧High Gain, High Value and High Performance/ Auto Gain Signal Booster
‧Amplify and AP's radio signal to 30dBm or more
‧Make broadband wireless application in possible coverage
‧Increase AP's receiving sensitivity up to -100dB
‧Increasing radio communication range by providing transmit gain as well as low-noise receive gain.
‧Case aluminum construction/weather-proof/ Lightning protection
‧This device can add strength radio signal to increase the effective range and coverage area for Wi-Fi communication.
‧Simply attach the DC Injector with 2.4GHz radio signal input plus the DC power feed to the outdoor unit and N type antenna.
‧The outdoor booster increase range by providing transmit gain as well as low noise receive gain.
‧The benefit for signal booster can save lots of wiring costs and easy to build wireless infrastructure for home or business use

Specification:

Model Name	ARG1205b (500mW, 1W, 2W and 4W)
Operating Range	2400~2500 MHz
Operating Mode	Bi-directional, half-duplex, auto-switching via carrier sensing
Connector Type	N-type, female (50 ohm)
Transmit Gain	24dB Max. (Automatically adjusted)
Tx Input Power	0 ~20 dBm
Output Power	500mW(25dBm) / 1W(27dBm) / 2W(30dBm) / 4W(33dBm) nominal
Receiver Gain	15 dB typital
Noise Figure	3.5dB typical
Frequency Response	¡Ó1 dB over operating range
Power Adaptor	7~9V /DC 110/220V /AC auto switching AC Adapter for DC Injector
Operating Temp.	-20 to +70℃
Operating Humidity	Up to 95% relative humidity
Booster material	Cast Aluminum
Lightning Protection	Direct DC ground at antenna connector
DC Surge Protection	At DC input from transmission cable
Outdoor Unit (cm)	11.5cm(L) x 6.5cm(W) x 4.8cm(H)
DC Injector (cm)	10.2cm(L) x 3.6cm(W) x 2.6cm(H)
Package Contents	An Outdoor unit, the bi-directional booster DC Injector x1 7 ~ 9 V/DC 110/220 V/AC power adapter x1 SMA Male RP to N male RG316 cablex1 Installation Guide
Package Weight	< 3 lbs

Safety Approval:

Other Description: